Buy VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA at The Best Price
Also Read our VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA Reviews below before you decide to buy VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA
- Extension poll included. 5.5in without extension poll. Height is adjustable from 16.9" to 25.6" ( 43-65 cm ). Ceiling plate adjustable 0 to 90 degree swivel, fits Vaulted ceiling
- Mounting arms removable and extendable, extra extension adaptor included
- Heavy duty steel construction, Maximum loading 44 lbs (20 kgs); Rotate adjustment left and right 5 degrees
- Integrated cable management; Exclusive "No-slip" adjustment system; Lock in any position; Easily release and lock
- Standard size hardware,comprehensive installation manual included.VideoSecu brand. Please report to Amazon.com if you recieve a mount without VideoSecu logo
Product Description
This mount is VideoSecu brand.Universal mount features a flexible mounting system that can be used with most projector model, and it has the versatility to attach to nearly any ceiling. The mounting interface features four double-jointed support arms that allow flexible positioning to reach almost any mounting point of the projector. Each arm can be precisely positioned to avoid covering important projector ventilation and access points used for lamp and air filter replacement. This minimizes heat build-up and maximizes lamp life. Its robust construction allows the mount to positively hold the projector fixed at nearly any angle. This universal mount's tilt and roll can be adjusted independently of one another, compared to the clumsier adjustments needed for ball-and-socket mounts. it comes with an adjustable channel and ceiling plate. This allows the projector to be mounted at an adjustable height from the ceiling. This auction is for 1 set of White projector ceiling mount. Does this mount fit my projector? Please look at the mounting screws on the top of your projector. Measure the distance between the holes. If your projector has 3 holes pattern or 4 hole pattern, and the maxim distance between any two holes is less than 12.5 inch/32 cm, then this mount will fit your projector. The longer extenders which can cover an area up to 17 inch in diameter sold separately in our Amazon store ASIN: B0036849J6.
VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA Reviews
VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA Reviews
22 of 24 people found the following review helpful: By acid6x "acidiumsix" (mendocino county Ca.) - See all my reviews This review is from: VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA (Office Product) I bought this mount after reading the reviews and was a little edgy about it because of the "one star" review i read that said it might just drop from the ceiling...Well before i hung my projector from it I ACTUALLY GRABBED ONTO IT AND HUNG WITH THE FULL 140LBS OF MY BODY WEIGHT AND IT SLIPPED ABOUT 1/4" AND THEN CAUGHT. I noticed that if you turn the sliding height adjustment bar upside down it will slip off SO MAKE SURE YOU PUT THAT BAR ON THE RIGHT WAY (try it both ways, the right one will be obvious) If you install it correctly you REALLY CANT BEAT THIS FOR THE MONEY. It is a must that you be somewhat mechanically inclined..if your unsure, have a friend on hand for second opinions and to help you hold everything steady. Once its up its easy to make adjustments and it looks sweet! 12 of 13 people found the following review helpful: Amazon Verified Purchase This review is from: VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA (Office Product) I used this for an Optoma HD20 projector. The mount has 4 arms and 3 pieces that insert into the arms and that screw into the projector itself. I did not use the extension piece. I used this to mount my projector into the ceiling. I didn't have any studs, and just used 2 of those metal mushrooming sheetrock wall-anchors (each rated at 20 lbs). Installation of the mounting plate using those was a breeze. Compared to other mount systems (which often sell the ceiling mounting plate separately from the plate that attaches to the projector), this is an extremely good deal. Everything you need comes in one box for a very low price, and installation is pretty painless. 12 of 13 people found the following review helpful: By Amazon Verified Purchase This review is from: VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA (Office Product) This did the job that was needed!! I used this mount for an Inforcus projector for our theatre room. First off, prior reviews made me suspect of buying this because they stated flimsy quality, mount, hardware, etc. I hooked this too a stud in the ceiling and it easliy held my wife a couple feet from the floor!!!!!!! The instructions could be a little bit better, but its pretty much common sense. Pitch and yaw angles are minimal, but will get the job done to make sure your have a straight picture. I even hooked this mount to an Optoma just to see if it would fit and no suprises it did with ease. If you contemplating this mount, I would say get it!! it is surely worth the cheap price and the delivery time was amazing as well! |
› See all 117 customer reviews...